Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.
Cd Wintv 7 Serial Number
To understand why this happens, lets look at how the process of clicking the record button in TitanTV and how this turns into a WinTV Scheduled recording. When you click the red 'record' button in TitanTV, Titan delivers a .tvpi file to your PC which contains the details of the recording (channel number, channel name, time, date, etc.). But if the channel number doesn't match a channel which WinTV can tune to, WinTV ignores this attempt to schedule the recording and you will not see this scheduled item in the WinTV Scheduler.
NOTE: To save your WinTV channel list, you may save the file HcwChanDB_5.mdb (which is located in the C:/users/public/wintv:for vista/windows 7 or C:\Documents and Settings\All Users\Documents\WinTV: for XP) into a temporary folder, and copy this file back into the WinTV directory after any re-installation to preserve your channel list.
Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
0000000000100000 - 0000000027ff0000 (usable) BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data) BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)639MB LOWMEM available.found SMP MP-table at 000fbdb0On node 0 totalpages: 163824 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 159728 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1DMI 2.3 present.ACPI: RSDP (v000 AMI ) @ 0x000fc9a0ACPI: RSDT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x27ff0000ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x27ff0030ACPI: MADT (v001 AMIINT VIA_P6 0x00000009 MSFT 0x00000097) @ 0x27ff00b0ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000ACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Processor #0 6:8 APIC version 17ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationBuilt 1 zonelistsKernel command line: root=/dev/hdb1 ro quiet splash acpi=noapicmapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Initializing CPU#0PID hash table entries: 4096 (order: 12, 65536 bytes)Detected 868.937 MHz processor.Using pmtmr for high-res timesourceConsole: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 641692k/655296k available (1435k kernel code, 12924k reserved, 755kdata, 224k init, 0k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay loop... 1720.32 BogoMIPS (lpj=860160)Security Framework v1.0.0 initializedSELinux: Disabled at boot.Mount-cache hash table entries: 512 (order: 0, 4096 bytes)CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 0000000000000000CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 0000000000000000CPU: L1 I cache: 16K, L1 D cache: 16KCPU: L2 cache: 256KCPU serial number disabled.CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000CPU: Intel Pentium III (Coppermine) stepping 06Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Checking 'hlt' instruction... OK.Checking for popad bug... OK.ACPI: Looking for DSDT in initrd... not found!ENABLING IO-APIC IRQs..TIMER: vector=0x31 pin1=2 pin2=-1checking if image is initramfs...it isn't (bad gzip magic numbers); looks likean initrdFreeing initrd memory: 4300k freedNET: Registered protocol family 16EISA bus registeredPCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1PCI: Using configuration type 1mtrr: v2.0 (20020519)ACPI: Subsystem revision 20050211ACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (00:00)PCI: Probing PCI hardware (bus 00)PCI: Via IRQ fixupACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: Power Resource [URP1] (off)ACPI: Power Resource [URP2] (off)ACPI: Power Resource [FDDP] (off)ACPI: Power Resource [LPTP] (off)ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 10 devicesPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routing** PCI interrupts are no longer routed automatically. If this** causes a device to stop working, it is probably because the** driver failed to call pci_enable_device(). As a temporary** workaround, the "pci=routeirq" argument restores the old** behavior. If this argument makes the device work again,** please email the output of "lspci" to ** so I can fix the driver.audit: initializing netlink socket (disabled)audit(1110706298.404:0): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)devfs: 2004-01-31 Richard Gooch ()devfs: boot_options: 0x0Initializing Cryptographic APIPCI: Enabling Via external APIC routingisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundserio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabledttyS0 at I/O 0x3f8 (irq = 4) is a 16550AttyS1 at I/O 0x2f8 (irq = 3) is a 16550AttyS0 at I/O 0x3f8 (irq = 4) is a 16550AttyS1 at I/O 0x2f8 (irq = 3) is a 16550Aio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registeredRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizeinput: AT Translated Set 2 keyboard on isa0060/serio0EISA: Probing bus 0 at eisa0EISA: Detected 0 cards.NET: Registered protocol family 2IP: routing cache hash table of 8192 buckets, 64KbytesTCP: Hash tables configured (established 262144 bind 65536)NET: Registered protocol family 8NET: Registered protocol family 20Restarting tasks... Strange, kswapd0 not stopped Strange, kseriod not stopped doneACPI wakeup devices:PCI0 UAR1 UAR2 USB USB1 AC9 MC9 SLPBACPI: (supports S0 S1 S4 S5)RAMDISK: cramfs filesystem found at block 0RAMDISK: Loading 4300KiB [1 disk] into ram disk... done.VFS: Mounted root (cramfs filesystem) readonly.Freeing unused kernel memory: 224k freedACPI: Processor [CPU1] (supports 16 throttling states)NET: Registered protocol family 1Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMAProbing IDE interface ide0...hda: IBM-DTLA-307015, ATA DISK drivehdb: SAMSUNG SV8004H, ATA DISK driveelevator: using anticipatory as default io scheduleride0 at 0x1f0-0x1f7,0x3f6 on irq 14hda: max request size: 128KiBhda: 30003120 sectors (15361 MB) w/1916KiB Cache, CHS=29765/16/63, UDMA(100)hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 hdb: max request size: 128KiBhdb: 156368016 sectors (80060 MB) w/1945KiB Cache, CHS=65535/16/63, UDMA(100)hdb: cache flushes supported /dev/ide/host0/bus0/target1/lun0: p1 p2 Probing IDE interface ide1...hdc: TDK CDRW161040X, ATAPI CD/DVD-ROM drivehdd: HITACHI DVD-ROM GD-7500, ATAPI CD/DVD-ROM driveide1 at 0x170-0x177,0x376 on irq 15Probing IDE interface ide2...Probing IDE interface ide3...Probing IDE interface ide4...Probing IDE interface ide5...Stopping tasks: ==Freeing memory... done (456 pages freed)Restarting tasks... doneVFS: Can't find ext3 filesystem on dev hdb1.VFS: Can't find an ext2 filesystem on dev hdb1.ReiserFS: hdb1: found reiserfs format "3.6" with standard journalReiserFS: hdb1: using ordered data modeReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdb1: checking transaction log (hdb1)ReiserFS: hdb1: Using r5 hash to sort namesAdding 511520k swap on /dev/hdb5. Priority:-1 extents:1hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB CacheUniform CD-ROM driver Revision: 3.20hdd: ATAPI 40X DVD-ROM drive, 512kB Cacheparport_pc: VIA 686A/8231 detectedparport_pc: probing current configurationparport_pc: Current parallel port base: 0x378parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]parport_pc: VIA parallel port: io=0x378, irq=7lp0: using parport0 (interrupt-driven).mice: PS/2 mouse device common for all miceinput: ImPS/2 Generic Wheel Mouse on isa0060/serio1Capability LSM initializedts: Compaq touchscreen protocol outputdevice-mapper: 4.3.0-ioctl (2004-09-30) initialised: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27cdrom: open failed.cdrom: open failed.ReiserFS: hdb7: found reiserfs format "3.6" with standard journalReiserFS: hdb7: using ordered data modeReiserFS: hdb7: journal params: device hdb7, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdb7: checking transaction log (hdb7)ReiserFS: hdb7: Using r5 hash to sort namesReiserFS: hdb6: found reiserfs format "3.6" with standard journalReiserFS: hdb6: using ordered data modeReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdb6: checking transaction log (hdb6)ReiserFS: hdb6: Using r5 hash to sort namesReal Time Clock Driver v1.12input: PC Speakerinserting floppy driver for 2.6.10-4-386Floppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077Linux agpgart interface v0.100 (c) Dave Jonesagpgart: Detected VIA Apollo Pro 133 chipsetagpgart: Maximum main memory to use for agp memory: 564Magpgart: AGP aperture is 64M @ 0xe0000000cpci_hotplug: CompactPCI Hot Plug Core version: 0.2pci_hotplug: PCI Hot Plug PCI Core version: 0.5Evaluate _OSC Set fails. Status = 0x0005pciehp: add_host_bridge: status 5pciehp: Fails to gain control of native hot-plugshpchp: shpc_init : shpc_cap_offset == 0shpchp: Standard Hot Plug PCI Controller Driver version: 0.4usbcore: registered new driver usbfsusbcore: registered new driver hubUSB Universal Host Controller Interface driver v2.2ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 16 (level, low) -> IRQ 16uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controlleruhci_hcd 0000:00:07.2: irq 16, io base 0xd800uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1hub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedACPI: PCI interrupt 0000:00:07.3[D] -> GSI 16 (level, low) -> IRQ 16uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)uhci_hcd 0000:00:07.3: irq 16, io base 0xdc00uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2hub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedusb 1-1: new full speed USB device using uhci_hcd and address 2SCSI subsystem initializedInitializing USB Mass Storage driver...usb 1-2: new full speed USB device using uhci_hcd and address 3scsi0 : SCSI emulation for USB Mass Storage devicesusbcore: registered new driver usb-storageUSB Mass Storage support registered.usb-storage: device found at 2usb-storage: waiting for device to settle before scanningusb 2-1: new low speed USB device using uhci_hcd and address 2usb 2-2: new full speed USB device using uhci_hcd and address 3ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 16 (level, low) -> IRQ 16hub 2-2:1.0: USB hub foundhub 2-2:1.0: 4 ports detectedgameport: CS416x Gameport on pci0000:00:0e.0 speed 1864 kHzdrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1proto 2 vid 0x03F0 pid 0x0317usbcore: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driverusbcore: registered new driver hiddevinput: USB HID v1.00 Mouse [04b3:310b] on usb-0000:00:07.3-1usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.0:USB HID core driverusb 2-2.1: new full speed USB device using uhci_hcd and address 4Linux video capture interface: v1.00bttv: driver version 0.9.15 loadedbttv: using 8 buffers with 2080k (520 pages) each for capturebttv: Bt8xx card found (0).ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 17 (level, low) -> IRQ 17bttv0: Bt878 (rev 2) at 0000:00:0f.0, irq: 17, latency: 64, mmio: 0xdebfe000bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13ebbttv0: using: Hauppauge (bt878) [card=10,autodetected]bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] Vendor: ST36531A Model: Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00usb-storage: device scan completebttv0: Hauppauge eeprom: model=61204, tuner=Philips FI1216 MK2 (5), radio=nobttv0: using tuner=5bttv0: i2c: checking for MSP34xx @ 0x80... not foundbttv0: i2c: checking for TDA9875 @ 0xb0... not foundbttv0: i2c: checking for TDA7432 @ 0x8a... not foundtvaudio: TV audio decoder + audio/video mux drivertvaudio: known chips:tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54(PV951),ta8874zbttv0: i2c: checking for TDA9887 @ 0x86... not foundSCSI device sda: 12706470 512-byte hdwr sectors (6506 MB)sda: assuming drive cache: write throughSCSI device sda: 12706470 512-byte hdwr sectors (6506 MB)sda: assuming drive cache: write through /dev/scsi/host0/bus0/target0/lun0:tuner: chip found at addr 0xc2 i2c-bus bt878#0 [sw]tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw] p1Attached scsi disk sda at scsi0, channel 0, id 0, lun 0bttv0: registered device video0bttv0: registered device vbi0bttv0: PLL: 28636363 => 35468950 .. okACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 17 (level, low) -> IRQ 17ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 193c59x: Donald Becker and others. www.scyld.com/network/vortex.html0000:00:11.0: 3Com PCI 3c905C Tornado at 0xd400. Vers LK1.1.19ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 19NET: Registered protocol family 17NET: Registered protocol family 10Disabled Privacy Extensions on device c02f0500(lo)IPv6 over IPv4 tunneling driverACPI: Power Button (FF) [PWRF]ACPI: Sleep Button (CM) [SLPB]ibm_acpi: ec object not foundapm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)apm: overridden by ACPI.eth0: no IPv6 routers presentReiserFS: sda1: found reiserfs format "3.6" with standard journalReiserFS: sda1: using ordered data modeReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda1: checking transaction log (sda1)ReiserFS: sda1: Using r5 hash to sort names
2ff7e9595c
Comments